Toolbars

The commands specific to the Basic Features toolbar are described in this reference section.

	Solid Functional Set See Functional Sets Sub-Toolbar
	Positioned Sketch See Sketcher Sub-Toolbar
	Plane See Reference Elements Sub-Toolbar
	Added Feature See Creating an Added Feature
	Protected Feature See Creating a Protected Feature
	Shellable Feature See Creating a Shellable Feature
	Internal Feature See Creating an Internal Feature
	External Feature See Creating an External Feature
	Core Feature See Creating a Core Feature
	Cutout See Creating a Cutout
	Push See Body Modifiers Sub-Toolbar

Functional Sets Sub-Toolbar

	Solid Functional See Inserting a Solid Functional Set
	Functional Set See Inserting a Functional Set

Sketcher Sub-Toolbar

Positioned Sketch See Sketcher User's Guide: Creating a Positioned Sketch.

Reference Elements Sub-Toolbar

	Plane See Generative Shape Design User's Guide: Creating Wireframe Geometry: Creating Planes.
	Point See Generative Shape Design User's Guide: Creating Wireframe Geometry: Creating Points.
	Line See Generative Shape Design User's Guide: Creating Wireframe Geometry: Creating Lines.

Body Modifiers Sub-Toolbar

	Push See Pushing a Body to Deform a Shell
	Pull See Pulling a Body to Deform a Shell
	Fitting See Fitting a 3D Shape into Another 3D Shape

The commands specific to the Functional Features toolbar are described in this reference section.

	Pocket See Creating a Pocket
	Boss See Creating a Boss
	Rib See Creating a Rib
	Rest See Creating a Rest
	Grill See Creating a Grill
	Reinforcement See Creating a Reinforcement
	Hole See Creating a Hole or Creating Threaded Holes

The commands specific to the Dress-up & Modifiers toolbar are described in this reference section.

	Cut See Feature Modifiers Sub-Toolbar
	Edge Fillet, local modifier See Functional Fillets Sub-Toolbar
	Edge Fillet See Part Design Fillets Sub-Toolbar
	Chamfer, local modifier See Chamfers Sub-Toolbar
	Draft Angle, local modifier See Drafts Sub-Toolbar
	Pattern See Transformation Modifiers Sub-Toolbar

Feature Modifiers Sub-Toolbar

	Cut See Creating a Cut
	Remove Feature See Removing a Shape
	Intersect Feature See Creating an Intersection

Functional Fillets Sub-Toolbar

	Functional Edge Fillet See Creating a Functional Edge Fillet
	Edge Fillet, local modifier See Creating an Edge Fillet (as a Local Modifier)
	Variable Radius Fillet, local modifier See Creating a Variable Radius Fillet
	Face-Face Fillet, local modifier See Creating a Face-Face Fillet
	Tritangent Fillet, local modifier See Creating a Tri-tangent Fillet
	Chordal Fillet, local modifier See Creating Chordal Fillets

Part Design Fillets Sub-Toolbar

	Edge Fillet See Creating Edge Fillets
	Variable Fillet See Creating Variable Radius Fillets
	Face-Face Fillet See Creating Face-Face Fillets
	Tritangent Fillet See Creating Tritangent Fillets
	Chordal Fillet See Creating Chordal Fillets

Chamfers Sub-Toolbar

	Chamfer See Creating Chamfers
	Chamfer, local modifier See Creating a Chamfer

Drafts Sub-Toolbar

	Draft Angle See Creating Basic Draft Features
	Variable Angle Draft See Creating Variable Angle Drafts (This command is only available with a FMP license.)
	Draft Reflect Line See Creating Drafts from Reflect Lines
	Draft Angle, local modifier See Creating a Draft Angle
	Variable Angle Draft, local modifier See Creating a Variable Angle Draft (This command is only available with a FMP license.)
	Draft Reflect Line, local modifier See Creating Drafts from Reflect Lines

Transformation Modifiers Sub-Toolbar

	Pattern See Creating a Rectangular Pattern
	Transform See Defining a Translation
	Mirror See Mirroring
	Offset See Creating an Offset
	Thickness as a local modifier See Creating Thicknesses
	Thread/Tap See Creating Threads and Taps

The commands specific to the Mold Design Properties toolbar are described in this reference section.

	Shell Properties See Setting Shell Properties
	Draft Properties See Setting Draft Properties

The commands specific to the Multi-Body Features toolbar are described in this reference section.

	Divide See Dividing Bodies
	Lip See Creating a Lip
	Flange See Creating a Flange
	Join See Joining Bodies
	Snap Lock See Creating a Snap-fit Attachment

The commands specific to the Functional Extraction toolbar are described in this reference section.

	Extraction Properties See Defining Extraction Properties
	Core Extraction See Creating a Core Extraction
	Cavity Extraction See Creating a Cavity Extraction
	Volumes Extraction See Extracting Geometry (Protected)
	Behavior Extraction See Extracting a Behavior

The commands specific to the Boolean Operations toolbar are described in this reference section.

	Assemble See Assembling Bodies
	See Add Remove Intersect Sub-Toolbar
(All these commands in the Boolean Operations toolbar are only available with the FMP license.)

Add Remove Intersect Sub-Toolbar

	Add See Adding Bodies
	Remove See Removing Bodies
	Intersect See Intersecting Bodies

The commands specific to the Analysis toolbar are described in this reference section.

	Draft Analysis See Analyzing Draft Angle
	Curvature Analysis See Analyzing Surfacic Curvature
	Tap/Thread Analysis See Analyzing Taps and Threads
	Wall Thickness Analysis See Analyzing Wall Thicknesses and More about Wall Thicknesses

The commands specific to the Dynamic Sectioning toolbar are described in this reference section.

Dynamic Sectioning See Creating Dynamic Section View