Creating a Profile Contouring Operation: Between Curve and Surfaces

You can create a Profile Contouring operation in Between Curve and Surfaces mode.

Related Topics
Profile Contouring
Selecting Guiding and Relimiting Elements
Defining a Virtual Bottom Plane

  1. Activate the Manufacturing Program and click Profile Contouring in the Prismatic Machining Operations toolbar.

    A Profile Contouring entity is added to the Manufacturing Program. The Profile Contouring dialog box appears directly at the Geometry tab .

    The top guiding curve and part bottom in the icon are colored red indicating that this geometry is required for defining the operation. All other geometry is optional.

  2. Still in the Geometry tab:

    See Selecting Geometry

    1. Set the Contouring mode to Between Curve and Surfaces .
    2. Click the red bottom in the icon, then select the bottom surface of the part in the authoring window.
    3. Click top guiding curve in the icon, then select the top edge of the part in the authoring window.
    4. Click the first relimiting element in the icon, then select a vertical edge at one end of the part in the authoring window.
    5. Click the second relimiting element in the icon, then select the vertical edge at the other end of the part in the authoring window.
    6. If needed, set offsets on the geometric elements.

    The guide and limit elements of the icon are now colored green indicating that this geometry is now defined. These are also indicated on the part.

    Note: A Collision Checking capability is available in the Geometry tab, which allows collision checking between the tool and guide elements during macro motions.



  3. Select the Strategy tab .

    1. Choose the desired Tool path style.
    2. Set the machining criteria.



  4. Go to the Tool tab to select a tool.

    See Specifying a Tool Element in a Machining Operation

  5. Select the Feeds and Speeds tab to specify the feedrates and spindle speeds for the operation.

  6. Select the Macro tab to add approach and retract motions to the operation.

    Note: When macros are used, the surface selected as bottom is checked for collisions.

    See Defining Macros on Milling Operations

  7. Click Tool Path Replay to check the validity of the operation.

    See Replaying the Tool Path


    • The tool path is computed.
    • A progress indicator is displayed.
    • You can cancel the tool path computation at any moment before 100% completion.


  8. Click OK to create the operation.