Removing Selected Inputs From a Template Definition

You can easily remove inputs from a template definition.

Before you begin: At least one input must be available under the Inputs item in the specification tree.
Related Topics
Adding Inputs to a Template Definition

  1. Select the input to be removed.

  2. Either, click on the Define Template Toolbar.

    Important: is activated only if an input is selected.

  3. Or in the specification tree, right-click the input(s) to be removed and click Remove selected inputs from template definition. The selected inputs are removed from the specification tree.



Tip: You can add again the removed input(s) by following the Adding Inputs to a Template Definition scenario.