Pre-defined Formats for Tolerance and Dimension Values

Modifiable formats

Modifiable formats appear in the default standard files provided by Dassault Systemes, just as any company-defined style would appear.

They can be modified or deleted using the Standards Editor, or de-activated (i.e. taken out of the list of available styles) using the Allowed* parameters described in the General Parameters section.

The following table lists which formats are modifiable for specific styles.

Important: The modification of a tolerance format is only applied to documents created after the tolerance format modification. To modify the tolerance format description of an existing document, you must:

Open this document.
In the Tools > Standard editor, select the Drafting category and the ISO.xml file.
Unfold the Tolerance Formats node.
Create a new instance with the convenient format.

Styles

Modifiable Formats

Tolerance

TOL_RES1

Value Display

micron

inch

grade

Non-modifiable formats

Non-modifiable formats are not defined in the standard file, but in the code itself.

They cannot be modified, but can be de-activated (i.e. taken out of the list of available styles) using the Allowed* parameters described in the General Parameters section. All styles provided up to V5R8 are of this type.

The following tables list non-modifiable styles, along with an example of the result when applied on a dimension. The "Link to the style definition column" contains a link to the style definition, from which you can derive new formats, simply by copying all or part of their definition.

Tolerance Formats

The following table lists non-modifiable tolerance formats.

Name	Description	Link to the style definition
TOL_NUM2	Numerical superimposed (small)	Click here
ANS_NUM2	Numerical superimposed with trailing zeros (large)	Click here
DIN_NUM2	Numerical superimposed (small)	Click here
SGL_NUM2	Numerical superimposed with trailing zeros and parentheses (small)	Click here
INC_NUM2	Numerical superimposed (large)	Click here
TOL_RES2	Numerical resolved	Click here
TOL_ALP1	Alphanumerical single value (large)	Click here
TOL_ALP2	Alphanumerical double value side-by-side (large)	Click here
TOL_ALP3	Alphanumerical double value superimposed (small)	Click here
TOL_0.7	Numerical superimposed (small)	Click here
TOL_1.0	Numerical superimposed (small)	Click here
ISONUM	Numerical superimposed with trailing zeros and parentheses (large)	Click here
ISOALPH1	Alphanumerical single value (large)	Click here
ISOALPH2	Alphanumerical double value superimposed (small)	Click here
CPL_FLA1	Alphanumerical single value (large)	Click here
CPL_FLA3	Alphanumerical double value superimposed (large)	Click here
CPL_50A1	Alphanumerical single value (small)	Click here
CPL_50A3	Alphanumerical double value superimposed (small)	Click here
CPL_75A1	Alphanumerical single value (medium)	Click here
CPL_75A3	Alphanumerical double value superimposed (medium)	Click here

Value Display Formats

The following table lists non-modifiable value display formats.

Name	Description	Link to the style definition
NUM.DIMM	Millimeters with dot	Click here
NUM,DIMM	Millimeters with comma	Click here
NUM.DINC	inches with trailing zeros	Click here
NUM.DIMP	inches with unit display	Click here
ANS.DIMM	Millimeters with trailing zeros	Click here
DISTMM	Millimeters with dot	Click here
DISTINC	inches with unit display	Click here
FEET-INC	feet and inch with unit display	Click here
NUM.ADMS	Degrees/minutes/seconds with dot	Click here
NUM,ADMS	Degrees/minutes/seconds with comma	Click here
INC.ADMS	Degrees/minutes/seconds with dot and trailing zeros	Click here
NUM.ARAD	radians	Click here
ANGLEDEC	Degrees with decimal format	Click here
ANGLEDMS	Degrees/minutes/seconds with dot	Click here

Alphanumerical and Numerical Display Tolerance Formats

The following table lists non-modifiable alphanumerical and numerical display tolerance formats.

Note: For these two types:

The 0 tolerance type is not available for user-defined descriptions.
The dimension value and alphanumerical tolerance are computed in accordance with the selected norm.

Name	Display	Description	Link to the style definition
MTL_A1N2		Alphanumerical and numerical value superimposed (small)	Click here
ISOCOMB		Alphanumerical and numerical value superimposed (large)	Click here