Dimension | ||||
|
| |||
Dimension Creation
- Dimension following the cursor (CTRL toggles)
- Defines whether the dimension line is positioned according to
the cursor, following it dynamically during the creation process.
By default,
this option is not selected.
- Default dimension line/geometry distance
- Defines the value at which the dimension is created from the
geometry. If you create associativity between the dimension and the geometry,
you can define the value at which the dimension will remain positioned.
By default,
the distance is
5 mm.
- Constant offset between dimension line and geometry
- Defines whether the distance between the created dimension and
the geometry remains the same when you move the geometry.
By default,
this option is not selected.
- By default create dimensions on circle's or cylinder's or revolute's
- Defines the default dimension anchor point position on the
selected geometry of revolution:
Select the desired option:
- Center or Axis
- The dimension anchor point will be positioned on its center point or its axis of revolution.
- Edge
- The dimension anchor point will be positioned on its edge.
By default,
Center or Axis
is selected.
Move
- Configure snapping
- Click this button to define in Dimension Snapping dialog box how snapping should be performed.
- Snap by default (SHIFT toggles)
- Defines whether the dimension will be snapped.
By default,
this option is not selected.
- Move only selected sub-part
- Defines whether only a dimension sub-part (text, line, etc) will
be moved.
By default,
this option is not selected.
Line-Up
- Default offset to reference
- Defines the default distance and angle from the reference
element.
0 mm and 0 deg.
- Default offset between dimensions
- Defines the default distance and angle between dimensions.
10 mm and 15 deg.
- Align stacked dimension values
- Defines whether the value positions of a group of stacked
dimensions are aligned on the value position of the smallest dimension of the
group.
By default,
this option is not selected.
- Align cumulated dimension values
- Defines whether the value positions of a group of cumulated
dimensions are aligned on the value position of the smallest dimension of the
group.
By default,
this option is selected.
- Automatically add a funnel
- Defines whether the value of a cumulated dimension requires
a funnel added automatically to be displayed correctly.
Warning: Only applicable when Align cumulated dimension values is selected.
By default,
this option is selected.
