Constructed Geometry | ||
| ||
Graphic Properties
- Apply settings
- Defines whether all graphic properties settings for constructed
geometry are applied.
By default,
this option is not selected.
- Color
- Defines the color for constructed geometry.
By default,
see the color above.
- Transparency
- Defines the transparency for constructed geometry.
By default,
the value is
128.
- Edges
-
- Color
- Defines the edges color for constructed geometry.
By default,
see the color above.
- Linetype
- Defines the edges linetype for constructed geometry.
By default,
the linetype is 1 (solid
line).
- Thickness
- Defines the edges thickness for constructed geometry.
By default,
the thickness is 1 (very thin
line).
- Lines and Curves
-
- Color
- Defines the lines and curves color for constructed
geometry.
By default,
see the color above.
- Linetype
- Defines the lines and curves linetype for constructed
geometry.
By default,
the linetype is 1 (solid
line).
- Thickness
- Defines the lines and curves thickness for
constructed geometry.
By default,
the thickness is 1 (very thin
line).
- Points
-
- Color
- Defines the points color for constructed geometry.
By default,
see the color above.
- Symbol
- Defines the points symbol for constructed geometry.
By default,
the symbol is a cross.
Limits
- All around overrun
- Defines the minimal limit between the constructed geometry and its related geometry.
By default,
the value is
10mm
Automatic Creation
- Center point
- Defines whether all the center point constructed geometry is
automatically created or not, for circle center, sphere center.
By default,
this option is not selected.
- Center axis
- Defines whether all the center axis constructed geometry is
automatically created or not, for cylinder, cone.
By default,
this option is not selected.
- Center plane
- Defines whether all the center plane constructed geometry is
automatically created or not, for slot.
By default,
this option is not selected.