Pipe Fabrication End Style

This section describes the Pipe Fabrication End Style definition table and how you can customize it. The Flexible Pipe Fabrication End Style is also described.

The following topics are discussed:

Overview

This section provides a brief overview of the Pipe Fabrication End Style definition table.

The Pipe Fabrication End Style definition table allows selection of end style depending upon the standard and material.

In Project Resource Management, this definition table should be assigned to:

The Pipe Fabrication End Style item in the resource table of Piping/Tubing Design Resources.

Rule Customization

This section describes the customization options of the Pipe Fabrication End Style definition table.

A typical Pipe Fabrication End Style definition table is shown below.

A typical Flexible Pipe Fabrication End Style definition table is shown below.

To customize the table, enter a line in the spreadsheet for each standard in every material that you use.

Parameter Type Importance Description
V_Standard String Required Used for filtering
DS_Material String Required Used for filtering
V_EndStyle String Required Enter value required for each standard and material
Comments String Optional Provides information only.

Sample Resource File

This section explains where to find the sample resource file.

The default location of XXX_XXX_PipeFabricationEndStyle.xls is

..\startup\EquipmentAndSystems\Piping\Specification\

and then the relevant specification, such as SS150R.