Creating Holes on Non-planar Faces

When creating a hole on a non-planar face, the associativity is ensured so that if you modify the face, the hole's location is modified accordingly. This task shows you how to create a hole on a non-planar face.

Before you begin:

To perform this task in the Part Design workbench, create a pad with a non-planar face then a point on this face. To perform this scenario in the Functional Modeling Part workbench, create a shellable prism with a non-planar face and then a point on this face.

Related Topics
About Holes

  1. Multi-select the point to locate the hole and the non-planar face (or non-planar face if working in Functional Modeling Part) on which you wish to create this hole. This operation creates a coincidence constraint setting the hole's position on the face.

  2. Click Hole if you wish to create a hole in Part Design, or click Hole to create a hole in Functional Modeling Part. The application creates a plane which is tangent to the selected face at the selected point. This plane will be used as support for the positioning sketch.

  3. In the Hole Definition dialog box, define the hole shape and enter the parameter values you want to use.

  4. When done, click OK to create the hole.

    The plane tangent to the face is not visible in the 3D area, but appears in the specification tree. You cannot edit it.





  5. Modify the point's location: The hole is moved accordingly.



    In case you select the face and then create a point by clicking on the face, the point is not constrained but associativity is ensured between the hole and the face.



    Warning: When handling power-copies, do not use holes on non-planar surfaces as input data: it is not possible to instantiate these element types.