Scanning a 3D Shape and Defining in Work Objects

You can scan the 3D shape and define a current object without taking the complete 3D shape into account. Therefore, it is useful for the analysis of the better understanding of the 3D shape design.

Both geometrical sets and ordered geometrical sets can be scanned.

Two modes are available: structure and update.

Before you begin: Create a 3D shape containing geometric elements.
Related Topics
Creating Datum Elements

  1. Select Edit > Scan or Define In Work Object... from the menu bar or click from the Select toolbar.

    The Scan toolbar appears enabling you to navigate through the structure of your 3D shape. Moreover, the 3D shape can be updated feature by feature.

    You actually need to click the buttons allowing you to move from one current feature to the other. Sketch elements are not taken into account by the command.



  2. Select the Scan mode to define the way of scanning:


    • Structure: all features of the 3D shape are now scanned in the order of display in the specification tree. The current position in the graph corresponds to the in work object.
      Important: Internal elements of sketches, part bodies and bodies, ordered geometrical sets, and elements belonging to a geometrical set are not taken into account by this mode.
      The Scan Graph dialog box appears and displays all the features belonging to the geometrical feature set.
    • Update: all features of a 3D shape are scanned in the order of the update (which is not necessarily the order of the specification tree). The current position in the scan graph does not correspond to the in work object: indeed the underlined object in the graph is not necessarily the one underlined in the specification tree.
      Important:
      • Datum features appear first; geometrical sets and ordered geometrical sets do not appear in the Scan Graph.
      • Deactivated features appear in the Scan Graph.
      • The 3D shqpe is put in no shoz, so is its 3D display, in order to build a new 3D display that contains the same features but in a different order. As a consequence, if a geometrical set or an ordered geometrical set is in no show, it is ignored and its elements are considered as being in show. To put the contents of this geometrical set or ordered geometrical set in no show, use the Geometrical_Set.x object > Hide components contextual command.
      Warning: The Update mode is not available with Power Copies.
      The Scan Graph dialog box appears and displays all the features belonging to the 3D shape.

  3. Click Display Graph .

  4. Select a feature in the Scan Graph or in the specification tree. The application highlights the feature in question in the specification tree as well as in the geometry area and makes it current.

    Tips:
    • A preview of the current object's parents is available:
      • the thickness of lines and points is increased and the surfaces' edges are in dotted lines; faces and edges are highlighted.
      • if the parents are not visible: the surfaces appear as transparent; lines and points are in yellow dotted lines.
    • If a parent of the in work object is in no show, it is temporarily shown when its child is the in work object.

  5. Click Previous to move to the previous feature.

  6. Click First to move to the first feature.

    Important: In case there are several datum features, the application highlights the last one as there are all scanned at the same time.

  7. Click Next to move to the next feature.

    Important: Scanning Next and Previous skip datum and deactivated features.

  8. Click Last to move to the last feature.

    Tip: Moving to the next or last feature enables to update elements that are not up-to-date.

  9. Click First to Update to move to the first element to be updated and consequently update it.

    Note: If both geometry and 3D shape are up-to-date, an information panel appears.

  10. Click this icon again to find the next element to be updated and so on until an information panel appears to inform you that both geometry and 3D shape are up-to-date.

  11. Click Play Update to replay the update of the geometry.

    A progression bar is displayed, while the scenario is being replayed.In case of update errors, the replay stops at the first error. The Update Error dialog box opens.

  12. Click Exit to exit the command.

    In the geometry area and the specification tree, the application highlights the current object. If the object was in no show, it is put in show as long as it stays current.

Important:
  • Defining a feature as current without scanning the whole 3D shape is possible using the Define in Work Object contextual command on the desired feature. This feature is put in show if needed, and keeps its status even if another feature is defined as the in work object.
  • When clicking a sub-element in the 3D geometry, it is in fact the feature used to generate this sub-element which is selected as the in work object. Likewise, this feature is edited when double-clicking a sub-element.
  • When a collapsed contextual element is , it is the node of its set that is highlighted in the Scan Graph.
  • To display 3D parameters attached to Part Design features, select the Parameters of features and constraints option in the Tools > Options > Infrastructure > Part Infrastructure > Display.