Part Design

Description

Describes a chamfer.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

Angle Defines the chamfer angle value.

Length1 Defines the length from the selected edge on the first face.

Length2 Defines the length from the selected edge on the second face.

Description

Describes the mechanical feature of Hole type you create when you click the

icon in the Part Design workbench. For more information, see the Part Design User's Guide.

Inheritance path

Standard - Feature > Standard - Visualizable Type -> MechanicalModeler - GeometricFeature > MechanicaModeler - Body > MechanicalModeler > Mechanical Feature > PartDesign - Hole

Attributes

CounterboreDepth Defines the counterbore depth

CounterboreDiameter Defines the counterbore diameter

Description

Describes the mechanical feature of Hole type you create when you click the

icon in the Part Design workbench. For more information, see the Part Design User's Guide.

Inheritance path

Standard - Feature > Standard - Visualizable Type -> MechanicalModeler - GeometricFeature > MechanicaModeler - Body > MechanicalModeler - Mechanical Feature > PartDesign - Hole

Attributes

CounterdrillAngle Defines the counterdrilled hole angle

CounterdrillDepth Defines the counterdrilled hole depth

CounterdrillDiameter Defines the counterdrilled hole diameter

Description

Describes the mechanical feature of Hole type you create when you click the

icon in the Part Design workbench. For more information, refer o the Part Design User's Guide.

Inheritance path

Standard - Feature > Standard - Visualizable Type -> MechanicalModeler - GeometricFeature > MechanicaModeler - Body > MechanicalModeler - Mechanical Feature > PartDesign - Hole

Attributes

CountersinkAngle Defines the countersink angle

CountersinkDepth Defines the countersink depth

CountersinkDiameter Defines the countersink diameter

Description

Describes a draft.

Inheritance path

Standard - Feature > Standard - Visualizable Type > > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

Angle Defines the draft angle value

Description

Describes a groove.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

EndAngle Defines the angle value for one direction

MergeEnd Defines how the pad is trimmed to existing material

NeutralFiber Defines how material is equally added to both sides of the profile

StartAngle Defines the angle value for the second direction

Thickness1 Defines the first thickness value

Thickness2 Defines the second thickness value

ThinMode Defines if thickness is added

Description

Describes the mechanical feature of Hole type you create when you click the

icon in the Part Design workbench. For more information, refer o the Part Design User's Guide.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler - Mechanical Feature

Attributes

BottomAngle Defines the bottom angle

BottomType Defines the hole bottom type (v-bottom or flat)

Depth Defines the hole depth

Diameter Defines the hole diameter

DiameterThread Defines the hole thread

HoleType Defines the hole type (Simple, Tapered, Counterbored, Countersunk, Counterdrilled)

LimitType Defines the hole limit (Blind, Up to Next, Up to Last, Up to Plane, Up to Surface)

Pitch Defines the distance between each crest of the thread

TapSide Defines the side or the thread (right or left)

Threaded Defines the hole as threaded

ThreadingDepth Defines the thread depth

Description

Describes a pad.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

FirstLength Defines the first length value

MergeEnd Defines how the pad is trimmed to existing material

NeutralFiber Defines how material is equally added to both sides of the profile

SecondLength Defines the second length value

Thickness1 Defines the first thickness value

Thickness2 Defines the second thickness value

ThinMode Defines if thickness is added

Description

Describes a pocket.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

FirstLength Defines the first length value

MergeEnd Defines how the pad is trimmed to existing material

NeutralFiber Defines how material is equally added to both sides of the profile

SecondLength Defines the second length value

Thickness1 Defines the first thickness value

Thickness2 Defines the second thickness value

ThinMode Defines if thickness is added

Description

Describes a rib.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

MergeEnd Defines how the pad is trimmed to existing material

NeutralFiber Defines how material is equally added to both sides of the profile

Thickness1 Defines the first thickness value

Thickness2 Defines the second thickness value

ThinMode Defines if thickness is added

Description

Describes a shaft.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

EndAngle Defines the angle value for one direction

MergeEnd Defines how the pad is trimmed to existing material

NeutralFiber Defines how material is equally added to both sides of the profile

StartAngle Defines the angle value for the second direction

Thickness1 Defines the first thickness value

Thickness2 Defines the second thickness value

ThinMode Defines if thickness is added

Description

Describes a shell.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

DefaultInsideThickness Defines the inside thickness value

DefaultOutsideThickness Defines the outside thickness value

Description

Describes a slot.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

MergeEnd Defines how the pad is trimmed to existing material

NeutralFiber Defines how material is equally added to both sides of the profile

Thickness1 Defines the first thickness value

Thickness2 Defines the second thickness value

ThinMode Defines if thickness is added

Description

Describes a stiffener.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

NeutralFiber Defines how material is equally added to both sides of the profile

StiffenerMode Defines the stiffener creation mode

Thickness1 Defines the first thickness value

Thickness2 Defines the second thickness value

Description

Describes the mechanical feature of Hole type you create when you click the

icon in the Part Design workbench. For more information, refer o the Part Design User's Guide.

Inheritance path

Standard - Feature > Standard - Visualizable Type -> MechanicalModeler - GeometricFeature > MechanicalModeler - Mechanical Feature > PartDesign - Hole

Attributes

TaperAngle Defines the taper angle

Description

Describes a thickness.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

DefaultThickness Defines the default thickness value.

Description

Describes a thicksurface.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler - Mechanical Feature

Attributes

BotOffset Defines the first offset value.

TopOffset Defines the second offset value.

Description

Describes a thread.

Inheritance path

Standard - Feature > Standard - Visualizable Type > MechanicalModeler > GeometricFeature > MechanicalModeler > Mechanical Feature

Attributes

Depth Defines the thread depth value.

Diameter Defines the thread diameter value.

Pitch Defines the distance between each crest.

ThreadSide Defines the side of the thread (right or left)